Category Archives: Electrical

Installing our Photovoltaic Solar System, Part I

I have had a pretty good year with the solar business thus far.  Therefore, I decided to roll some of this year’s profits into our own Photovoltaic (PV) system.  This idea has been batted about before, including as a battery back up for the sump pumps, however, a few things have developed since then.

First of all, as technology often does, newer things are available these days that make a solar system in the North East a better proposition.  Secondly, the solar business has done better than I expected.  As a result, I don’t often have much time to work on household projects.  That means that this years “capital improvement” budget has gone unspent for the most part.  Finally, I would like to offset some of the extra income tax from the profits.  What better way than to invest in the technology myself.  The Federal Government offers a 30% income tax incentive and the NY State government offers a 25% tax income incentive up to $5,000.00.  This will cut the overall cost of the installed system by almost 50%.

There are a number of considerations:

  1. How large of a system should be installed.  I decided that I wanted to offset 70-80% of my annual electrical use.  In this climate and environment, that equates to about 4.1 KW DC PV system.  This leaves a little downward room in case I decide to replace the electric stove with a gas unit.
  2. Where can it be installed.  Since the south facing roof has the solar hot water system, the PV system needs to be mounted on a sun shade type structure in the yard.
  3. What type of technology.  I was initially looking at a grid tied with battery back up, however, after I looked into the newest type of inverter, the Enphase microverter, I decided that this was the way to go.  A battery backup can be added at a later date.

The Enphase microverters are really cool.  The way this system works is every solar panel has its own small inverter instead of one large inverter for many panels.   The advantages of this type of system are thus:  In conventional system, shading of one panel can cause the entire solar array to turn off, making it ineffective.  With the microverters, the shaded panel may turn off, but the rest of the unshaded panels still put out full power.  In the Northeast, trees grow everywhere, it is nearly impossible to have a completely shade free site, nor should home owner’s be expected to clear cut their lots to accommodate a PV system.  The Enphase microverters mitigate some of those concerns.

Also, multiple inverters create redundancy.  Any one inverter can fail, leaving the other nineteen still operational.  There is automatic web monitoring for a small annual fee, or the modules can be monitored manually.  I may write a small web based program to monitor and post my energy output here.  The inverters themselves carry a 15 year warranty, whereas most other inverters carry a 5 year warranty.

Finally, there are no DC voltage losses to account for, making the entire system operate much more efficiently.

In anycase, the order has been signed, checks have been written and the excavator has been reserved for this weekend.  The first step is to dig and poor the footings for the sun shade.

More to follow.

Popularity: 1% [?]

Smart outlet strip

I did some research a while back on the standby loads around Casa de Catskill. The findings are in the post titled  “Kill-A-Watt meter results.“  The worst offender seemed to be the laptop charger and associated accessories.  The TV and other equipment was the second worst offender.

Smart Outlet Strip

Smart Outlet Strip

Enter the Smart Outlet Strip. These units can detect when current is being drawn by a “control” outlet and turn on or off all the other devices plugged into it accordingly. As a little experiment, I purchased two of them, one for the computer equipment and the other for the TV/VCR/DVD player.

According to my Kill-A-Watt meter results, I should save $14.56 a year on the TV stuff and $79.13 on the computer equipment . Each outlet strip cost $25.00, therefore, my payback should be about 7 months.

I will post a follow up in a few months to see if these assumptions are valid.

One thing to note, this is a fun experiment, but perhaps I am taking this energy saving stuff too far.  I don’t know,  saving $93.69 a year is nice, but there are bigger fish to fry, so to speak.  Still, every little bit helps in some way.  We all do what we can and certainly practicing what you preach is an important part of being environmentally aware.

Popularity: 6% [?]

Where does your electricity come from?

I posted about this once before. The US EPA has a web site called “How clean is the electricity I use,” complete with a place to fill in your zip code and find out.

We pay a lot for electric, it peaked at ¢17.8 per kWh last summer, now down to ¢12.5/kWh.  As it turns out, there is a reason for this, we are also well below average in power plant emissions:

FUEL MIX COMPARISON

1
What Is
My Fuel Mix?

This chart compares fuel mix (%) of sources used to generate electricity in your region to the fuel mix (%) for the entire United States.
Legend explaining that green represents National Fuel Mix and blue represents Your Region's Fuel Mix
1.3
2.1
chart
26.4
6.5
chart
27.0
chart
19.3
chart
7.8
chart
3.0
chart
15.5
chart
18.8
chart
21.5
chart
49.6
chart
%
Non-Hydro Renewables Hydro Nuclear Oil Gas Coal

EMISSIONS RATE COMPARISON

2
What Are the Emissions in My Area?
This chart compares the average emissions rates (lbs/MWh) in your geographical region to the national average emissions rates (lbs/MWh) for nitgrogen oxide, sulfur dioxide, and carbon dioxide.
Legend explaining that green represents National Emissions Rates and blue represents Your Region's Emissions Rates
chart 0.83
chart
1.94
chart
3.00
chart
5.26
chart
chart 700
chart
1314
chart

Mainly because our power company purchases a lot of hydro energy from Quebec, our electricity is fairly clean compared to the rest of the country. That does not mean that there is not room to improve because there certainly is.  Looking at the non-hydro renewable line, we are well below the rest of the country.

Stop by the EPA clean electricity site and see how your region is compared to the rest of the country.  It might be interesting.

H/T mother earth news

Popularity: 5% [?]

Power is out

And has been since Thursday, courtesy of the North East Ice Storm, V. 2008. At the height of the storm, my neighbor’s willow tree fell on his service entrance, taking out his power and tripping the circuit breaker on the utility pole for our power. The rest of the street, they are just fine. In fact, the surrounding area, there are no outages, just us.

Tree on electric service entrance

Tree on electric service entrance

So, you would think this relatively easy repair would be a snap for Central Hudson Gas and Electric. No, apparently we are a low priority in the grand scheme of things. We’ve called and they are very apologetic, “Yes, we are sorry… We know that it is inconvenient… We’ll try to get it back on as soon as possible.”

In the mean time, I was able to borrow a generator to run some of the things in the house; heat, refirgerator, sump pumps, TV and computer.  We’ve been running it two hours on two hours off to save gas.  The only thing we are lacking is running water.  You don’t understand what running water means until you don’t have it.  I had to go to the nieghbor’s pond and break the ice so I could get buckets of water to flush the toilets.

emergency backup power

emergency backup power

So, as soon as possible, I’ll be going ahead with the solar powered backup system.  More on that later.

Popularity: 5% [?]

Home Wiring Safety

I thought that this is especially apropos for a home renovation blog. According to the Nation Fire Protection Agency (NFPA) each year fires that start in electrical systems or lighting equipment

  • damage more than 24, 000 homes
  • kill 320 people
  • injure 830 more

In older buildings and houses electrical wiring that was properly installed according to the art at the time can be out dated and dangerous. A contractor friend of mine recently came across some knob and tube wiring that was still active and carrying 240 volts! Yikes!

Based on the idea of “what you don’t know can hurt you,” the Electrical Fire Safety Research Foundation has put together a very good website with information on what to look for when buying or owning an older home.

They also include a list of warning signs for electrical problems. These include:

  • Frequently tripping circuit breakers or blowing fuses
  • You get a tingling sensation when touching an appliance
  • Discolored or warm electrical outlets
  • Sparks coming from an electrical outlet
  • Persistent burning smell coming from an appliance or area
  • Flickering or dimming lights

If you have any of those conditions, the best advice is to hire a licensed electrician to investigate. Electricity is nothing to fool around with if you do not understand what you are doing.  If you own or are renovating an older  home, the information on their website is priceless.

Popularity: 6% [?]